Unternehmen

© 2019 AMEX SANIVAR

Ressourcen

Bleiben Sie in Kontakt

Melden Sie sich für unseren Newsletter an, um über neue Produktentwicklungen und unsere Veranstaltungen auf der ganzen Welt informiert zu werden.

  • LinkedIn - Grey Circle
  • YouTube - Grey Circle

Sanivar liners

saniline-water-close-up.jpg

Technical specifications liner:

  • Liner material: PET-multifilament yarn  

  • Coating material: Polyethylene / polyurethane 

  • Diameter: DN 80 - 800 (3-32")

  • Application: Potable water, industrial, sewage, gas, oil 

  • Installation length (max): 350m 

  • Installation time (max): 6 hours 

  • Installation method: Inversion 

  • Curing method: Ambient/Pressure 

  • Curing time (max): 24 hours 

  • Inversion pressure: 0.5-1.5 bar 

  • Max. applicable operating pressure: 16 bar

  • Bends: Up to 90° 

  • Ending: End Seal

Our CIPP liner that can navigate up to 90°  bends and cures through pressure

SaniLine

Tests and approvals:

  • Potable Water: DVGW, KTW, ACS, Hygiene Institute Moscow DVGW, SVGW

  • Quality Management: ISO 9001

  • Environmental Management: ISO 14001

  • Burst test: DIN 14811

  • Abrasion resistance DIN EN 14811:2008-01

  • Jet fuel chemical resistance: ASTM D2624 , ASTM D130, ASTM D3241 P

sanitube-sewage-close-up.jpg

Technical specifications liner:

  • Liner material: PET-multifilament yarn  

  • Coating material: Polyethylene / polyurethane 

  • Diameter: DN 25 - 400 mm (1-16") 

  • Application: Potable water, industrial, sewage, gas, oil

  • Installation length (max): 1500m 

  • Installation time (max): 2-5 m/min 

  • Installation method: Pull-in by winch

  • Curing method: Not applicable 

  • Max. applicable operating pressure: 35 bar

  • Bends: Up to 45° 

  • Ending: SaniGrip coupling

A close-fit pull-in liner made to withstand high pressures while requiring little installation equipment.

SaniTube

Tests and approvals:

  • Potable Water: DVGW, KTW, ACS, DVGW, SVGW, WRAS, 

  • Quality Management: ISO 9001

  • Environmental Management: ISO 14001

  • Burst test: DIN 14811

  • Abrasion resistance DIN EN 14811:2008-01

  • Jet fuel chemical resistance: ASTM D2624 , ASTM D130, ASTM D3241 P

unnamed.png

Technical specifications liner:

  • Liner material: Felt and PET-multifilament yarn  

  • Coating material: Polyethylene / polyurethane 

  • Diameter: DN 100 - 400 (4-16") 

  • Installation length (max): 350m 

  • Installation time (max): 10 hours 

  • Installation method: Pull-in then Inversion 

  • Curing method: Ambient/Pressure 

  • Curing time (max): 24 hours 

  • Inversion pressure: 0.5-1.5 bar 

  • Max. applicable operating pressure: 16 bar

  • Bends: Up to 30° 

  • Ending: End Seal

A Class IV static liner that becomes a pipe within a pipe.

SaniPipe

Tests and approvals:

  • Potable Water: DVGW, KTW, ACS, Hygene Institute Moscow DVGW, SVGW

  • Quality Management: ISO 9001

  • Environmental Management: ISO 14001

  • Burst test: DIN 14811

  • Abrasion resistance DIN EN 14811:2008-01

How it works