.png){kind=logo}
Amex 10® Seals – Localized Pipe Repair for All Media
Flexible sealing solutions for pressure and wastewater pipelines
Tests and Approvals
Our products meet national and international standards for use in demanding pipeline applications – tested and certified by accredited institutions in accordance with current norms and guidelines.
General Certifications
-
DIBt Z-42.3-474 – General Building Authority Approval (Germany)
-
ISO 9001 – Quality Management System
-
ISO 14001 – Environmental Management System
-
SCCP – Safety, Health and Environmental Protection Managemen
Material Durability
-
50-Year RAPRA – Long-Term Material Testing
-
DIN EN 681-1 & ASTM C1173 – 1,000-Hour Pressure Testing for Pipe Sealing Compounds
-
DIN 19523 – Resistance to High-Pressure Sewer Cleaning
Mechanical Properties
-
DIN ISO 7619-1 – Hardness Testing with Durometer
-
DIN EN ISO 1183-1 – Density Determination of Plastics
-
DIN 53504 – Tensile Strength and Elongation at Break (Rubber)
-
EN ISO 34-1 – Tear Resistance (Rubber)
-
DIN ISO 815 A – Compression Set (Rubber)
-
DIN ISO 4649 – Abrasion Resistance of Elastomers
-
DIN 53512, 53509 B – Rebound Elasticity & Flexural Behavior
Drinking Water Approvals
-
Current approvals upon request
Sewer Construction Quality Assurance
-
RAL-GZ 961 – S16.1 (Internal Seals) – Company Quality Mark
.jpg)
Amex 10 Mono®
The Amex 10 Mono® seal is used as an internal pipe repair sleeve for sealing joints and pipes in accessible pipes.
Amex 10 Mono® technical specifications:
-
Nominal Diameters (DN):
600–6,000 -
Seal Widths:
260 mm, 366 mm, 500 mm, and 600 mm -
Compatible Pipe Materials:
Concrete, steel, cast iron, asbestos cement, others on request -
Media Resistance:
Wastewater, drinking water, combined sewer, industrial wastewater, petrol, oil, gas, and other media upon request -
Maximum Operating Pressure (internal):
25 bar -
Maximum External Pressure (acting from outside):
5 bar on request -
Temperature Range:
-30 °C to +130 °C (continuous)
Tests & Approvals
Our products meet national and international standards for use in demanding pipeline applications – tested and certified by accredited institutions in accordance with current norms and guidelines.
General Certifications
-
DIBt Z-42.3-474 – General Building Authority Approval (Germany)
-
ISO 9001 – Quality Management System
-
ISO 14001 – Environmental Management System
-
SCCP – Safety, Health and Environmental Protection Managemen
Material Durability
-
50-Year RAPRA – Long-Term Material Testing
-
DIN EN 681-1 & ASTM C1173 – 1,000-Hour Pressure Testing for Pipe Sealing Compounds
-
DIN 19523 – Resistance to High-Pressure Sewer Cleaning
Mechanical Properties
-
DIN ISO 7619-1 – Hardness Testing with Durometer
-
DIN EN ISO 1183-1 – Density Determination of Plastics
-
DIN 53504 – Tensile Strength and Elongation at Break (Rubber)
-
EN ISO 34-1 – Tear Resistance (Rubber)
-
DIN ISO 815 A – Compression Set (Rubber)
-
DIN ISO 4649 – Abrasion Resistance of Elastomers
-
DIN 53512, 53509 B – Rebound Elasticity & Flexural Behavior
Drinking Water Approvals
-
Current approvals upon request
Sewer Construction Quality Assurance
-
RAL-GZ 961 – S16.1 (Internal Seals) – Company Quality Mark
Amex 10 Vario®
The Amex 10 Vario® seal uses our proven interlocking seal technology to reline pipes with our seals.
-
Nominal Diameters (DN):
600–6,000 -
Seal Widths:
500 mm+ -
Compatible Pipe Materials:
Concrete, steel, cast iron, asbestos cement, others on request -
Media Resistance:
Wastewater, drinking water, combined sewer, industrial wastewater, petrol, oil, gas, and other media upon request -
Maximum Operating Pressure (internal):
25 bar -
Maximum External Pressure (acting from outside):
5 bar on request -
Temperature Range:
-30 °C to +130 °C (continuous)
Tests & Approvals
Our products meet national and international standards for use in demanding pipeline applications – tested and certified by accredited institutions in accordance with current norms and guidelines.
General Certifications
-
DIBt Z-42.3-474 – General Building Authority Approval (Germany)
-
ISO 9001 – Quality Management System
-
ISO 14001 – Environmental Management System
-
SCCP – Safety, Health and Environmental Protection Managemen
Material Durability
-
50-Year RAPRA – Long-Term Material Testing
-
DIN EN 681-1 & ASTM C1173 – 1,000-Hour Pressure Testing for Pipe Sealing Compounds
-
DIN 19523 – Resistance to High-Pressure Sewer Cleaning
Mechanical Properties
-
DIN ISO 7619-1 – Hardness Testing with Durometer
-
DIN EN ISO 1183-1 – Density Determination of Plastics
-
DIN 53504 – Tensile Strength and Elongation at Break (Rubber)
-
EN ISO 34-1 – Tear Resistance (Rubber)
-
DIN ISO 815 A – Compression Set (Rubber)
-
DIN ISO 4649 – Abrasion Resistance of Elastomers
-
DIN 53512, 53509 B – Rebound Elasticity & Flexural Behavior
Drinking Water Approvals
-
Current approvals upon request
Sewer Construction Quality Assurance
-
RAL-GZ 961 – S16.1 (Internal Seals) – Company Quality Mark
Amex 10 LEM®
The Amex 10 LEM® seal is used for sealing liner ends in all pipes.
Amex 10 LEM® technical specifications:
-
Nominal Diameters (DN):
150–4,000 -
Seal Widths:
180, 266, 360, 500 mm -
Compatible Pipe Materials:
Concrete, steel, cast iron, asbestos cement, others on request -
Media Resistance:
Wastewater, drinking water, combined sewer, industrial wastewater, petrol, oil, gas, and other media upon request -
Maximum Operating Pressure (internal):
25 bar -
Maximum External Pressure (acting from outside):
5 bar on request -
Temperature Range:
-30 °C to +130 °C (continuous)
Tell us about your job
Have a project that could use one of our seals? Contact us with as many details abut the job as you can and we will help put together a solution for your needs!
